General Introduction
Angle is widely using in building furnish, Used at corner junctions to make the building three-dimensional and beautiful.
Corner bead is using 0.4mm G300 galvanized steel with edges punching for to strengthen and protect plasterboard installations,
Utility angle is used in a variety of applications including corner reinforcement and soffit construction. With a higher gauge than Façade Angles, they are more commonly used in external applications. The material are 0.75BMT and 1.15BMT G300 galvanized steel.
Internal Backing Angles used in bathrooms behind AC or Cement Sheets, adding strength and eliminating cracking of the internal corner.
All other designs are available.
Our machines can do stable and quality finished panel with fast speed and less labour.
Key Parts Brands &Materials
PLC &Inverter: Siemens; Hydraulic: Rexroth; Roller: Cr12; Shaft: 40Cr;
Line Forming Speed
40m/min (Standard), 80m/min, 120m/min
Worker Installation Size Power Capacity
Mini 1 Mini 12 * 1.5 m (Up to final design &specifications) Start from 8 KW.
Line Standard Components
3 tons decoiler, guider, roll forming system, post cutter, runout table, safety cover, hydraulic system and control system
Optional Components
3 tons auto decoiler with coil car, printer, stamper, 3 or 6 meters auto stacker and packer, IOT control system
Line Designs
Single Size(Standard), cassettes
